Design of Rotating Electrical Machines

Table of ContentsAbout the Authors. Preface. Abbreviations and Symbols. 1 Principal Laws and Methods in Electrical Machine Design. 1.1 Electromagnetic PrincipleDesign of Rotating Electrical Machines|40064012|sarzamindoost|Design of Rotating Electrical Machines,Juha Pyrhonen,Tapani Jokinen,Valeria Hrabovcova,ISBN 9780470740088
با ما همراه باشید با موضوع Design of Rotating Electrical MachinesTable of ContentsAbout the Authors.


Abbreviations and Symbols.

1 Principal Laws and Methods in Electrical Machine Design.

1.1 Electromagnetic Principles.

1.2 Numerical Solution.

1.3 The Most Common Principles Applied to Analytic Calculation.

1.4 Application of the Principle of Virtual Work in the Determination of Force and Torque.

1.5 Maxwell’s Stress Tensor; Radial and Tangential Stress.

1.6 Self-Inductance and Mutual Inductance.

1.7 Per Unit Values.

1.8 Phasor Diagrams.


2 Windings of Electrical Machines.

2.1 Basic Principles.

2.2 Phase Windings.

2.3 Three-Phase Integral Slot Stator Winding.

2.4 Voltage Phasor Diagram and Winding Factor.

2.5 Winding Analysis.

2.6 Short Pitching.

2.7 Current Linkage of a Slot Winding.

2.8 Poly-Phase Fractional Slot Windings.

2.9 Phase Systems and Zones of Windings.

2.10 Symmetry Conditions.

2.11 Base Windings.

2.12 Fractional Slot Windings.

2.13 Single- and Two-Phase Windings.

2.14 Windings Permitting a Varying Number of Poles.

2.15 Commutator Windings.

2.16 Compensating Windings and Commutating Poles.

2.17 Rotor Windings of Asynchronous Machines.

2.18 Damper Windings.


3 Design of Magnetic Circuits.

3.1 Air Gap and its Magnetic Voltage.

3.2 Equivalent Core Length.

3.3 Magnetic Voltage of a Tooth and a Salient Pole.

3.4 Magnetic Voltage of Stator and Rotor Yokes.

3.5 No-Load Curve Equivalent Air Gap and Magnetizing Current of the Machine.

3.6 Magnetic Materials of a Rotating Machine.

3.7 Permanent Magnets in Rotating Machines.

3.8 Assembly of Iron Stacks.

3.9 Magnetizing Inductance.


4 Flux Leakage.

4.1 Division of Leakage Flux Components.

4.2 Calculation of Flux Leakage.


5 Resistances.

5.1 DC Resistance.

5.2 Influence of Skin Effect on Resistance.

6 Main Dimensions of a Rotating Machine.

6.1 Mechanical Loadability.

6.2 Electrical Loadability.

6.3 Magnetic Loadability.

6.4 Air Gap.


7 Design Process and Properties of Rotating Electrical Machines.

7.1 Asynchronous Motor.

7.2 Synchronous Machine.

7.3 DC Machines.

7.4 Doubly Salient Reluctance Machine.


8 Insulation of Electrical Machines.

8.1 Insulation of Rotating Electrical Machines.

8.2 Impregnation Varnishes and Resins.

8.3 Dimensioning of an Insulation.

8.4 Electrical Reactions Ageing Insulation.

8.5 Practical Insulation Constructions.

8.6 Condition Monitoring of Insulation.

8.7 Insulation in Frequency Converter Drives.


9 Heat Transfer.

9.1 Losses.

9.2 Heat Removal.

9.3 Thermal Equivalent Circuit.


Appendix A.

Appendix B.